Digi IX20 - Reboot Your IX20 Device; Reboot Your Device Immediately

System administration Reboot your IX20device
IX20 User Guide
1015
>
4. To perform an firmware update by using a local file, use the version parameter to identify the
appropriate firmware version asdetermined using the modem firmware check or modem
firmware list command. For example::
> modem firmware update version 24.01.5x4_ATT
Updating modem firmware ...
-----------------------------
Successfully updated firmware
Modem firmware update complete
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Reboot your IX20 device
You can reboot the IX20 device immediately or schedule a reboot for a specific time every day.
Note You may want to saveyour configuration settings to a file before rebooting. See Save
configuration to a file.
Reboot your device immediately
 Web
Log into the IX20 WebUI asa user with full Admin accessrights.
1. From the main menu, click System.
2. Click Reboot.
3. Click Reboot to confirm that you want to reboot the device.
 Command line