Digi IX20 - Show Hotspot Status and Statistics

Hotspot
IX20 User Guide
408
7. Set walled garden settings.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. Include the domain or subnet of supporting servers for payment or
other external login and authentication (such as social media sites).
n
Add domainsthat can be accessed by the client prior to authentication:
(config network hotspot new_hotspot)> add walled_garden domains end
domain_name
(config network hotspot new_hotspot)>
Repeat to add additional domains.
n
Add IPaddressesand subnets that can beaccessed by the client prior to
authentication:
(config network hotspot new_hotspot)> add walled_garden subnets end
value
(config network hotspot new_hotspot)>
where value is an IPv4 address and optional subnet mask, using the format IPv4_
address[/netmask], or the keyword any.
Repeat to add additional IPaddresses or subnets.
8. Save the configuration and apply the change
(config)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show hotspot status and statistics
 Web
Log into the IX20 WebUI asa user with full Admin accessrights.
1. On the main menu, click Status
2. Under Networking, click Hotspot.
The Hotspot statuspage is displayed.