Digi IX20 User Manual

Command lineinterface Command linereference
IX20 User Guide
1163
mkdir
Create a directory. Parent directoriesare created as needed.
Syntax
mkdir <path>
Parameters
path: The directory path to create.
modem at
Send an AT command to the modem and display the response.
Syntax
modem at <cmd> [name STRING] [imei STRING]
Parameters
cmd: The AT command string.
name: Theconfigured name of the modem to execute this CLI command on.
imei: The IMEI of the modem to execute this CLI command on.
modem at-interactive
Start an AT command session on the modem's AT serial port.
Syntax
modem at-interactive [name STRING] [imei STRING]
Parameters
name: Theconfigured name of the modem to execute this CLI command on.
imei: The IMEI of the modem to execute this CLI command on.
modem firmware check
Inspect /opt/[MODEM_MODEL]/Custom_Firmware/ directory for new modem firmware file.
Syntax
modem firmware check [name STRING] [imei STRING]
Parameters
name: Theconfigured name of the modem to execute this CLI command on.
imei: The IMEI of the modem to execute this CLI command on.
modem firmware list
List modem firmware files found in the /opt/[MODEM_MODEL]/ directory.

Digi IX20 Specifications

General

Category	Wireless Router
Cellular Connectivity	4G LTE
Ethernet Ports	4
Wi-Fi	802.11ac
SIM Slots	2
WAN Ports	1
LAN Ports	3
Weight	0.5 kg
Operating Temperature	-40°C to +70°C (-40°F to +158°F)