Virtual PrivateNetworks(VPN) OpenVPN
IX20 User Guide
560
Configure an OpenVPN client by using an .ovpn file
Required configuration items
n
Enable the OpenVPNclient.
The OpenVPNclient is enabled by default.
n
The firewall zone to beused by the OpenVPNclient.
Additional configuration items
n
The route metric for the OpenVPNclient.
n
The login credentials for the OpenVPNclient, if configured on the OpenVPNserver.
See Configure SureLink activerecovery for OpenVPNfor information about OpenVPNactiverecovery.
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN >OpenVPN >Clients.
To Next Page
Loading...
Need help?
General