Virtual PrivateNetworks(VPN) IPsec
IX20 User Guide
544
(config network scep_client Fortinet_SCEP_client)> renewable_time integer
(config network scep_client Fortinet_SCEP_client)>
9. (Optional) Enable verbose logging in /var/log/scep_client:
(config network scep_client Fortinet_SCEP_client)> debug true
(config network scep_client Fortinet_SCEP_client)>
10. Save the configuration and apply the change
(config network scep_client Fortinet_SCEP_client)> save
Configuration saved.
>
11. Typeexit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show SCEP client statusand information
You can show general SCEPclient information for all SCEPclients, and specific information for an
individual SCEPclient.
This procedure isonly available from the Admin CLI.
Command line
1. Select the device in Remote Manager and click Actions> Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to accessthe Admin CLI.
2. To display details about all configured SCEPclients, type the following at the prompt:
> show scep-client
SCEP Enabled Expiry
----- ------- -------
test true Jun 4 19:05:25 2022 GMT
test1 false
>
3. To display details about a specific SCEPclient:
> show scep-client name name
For example:
> show scep-client name test
test SCEP Status
----------------
To Next Page
Loading...
Need help?
General