Applications Start a manual script
IX20 User Guide
859
12. Typeexit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Start a manual script
You can start a script that isenabled and configured to havea run mode of Manual.
Web
Log into the IX20 WebUI asa user with full Admin accessrights.
1. At the Statuspage, click Scripts.
The Scriptspage displays:
2. For scripts that are enabled and configured to have a run mode of Manual, click Start Script
to start the script.
Command line
1. Select the device in Remote Manager and click Actions> Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to accessthe Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index Label Enabled Status Run time
----- ----------- ------- ------ --------
0 script1 true active
1 script2 true idle 01:00
>
3. Start the script:
)> system script start script1
>
To Next Page
Loading...
Need help?
General