Digi IX20 - Configure the Device as an NTP Server

Services Network Time Protocol
IX20 User Guide
756
servers can be configured. If multiple servers are configured, a number of time samplesare obtained
from each of the servers and a subset of the NTP clock filter and selection algorithmsare applied to
select the best of these.
See Configure the device as an NTPserver for information about configuring your device as an NTP
server.
Configure the device asan NTP server
Required Configuration Items
n
Enable the NTPservice.
n
At least oneupstream NTPserver for synchronization. The default setting is the Digi NTP
server, time.devicecloud.com.
Additional Configuration Options
n
Additional upstream NTPservers.
n
Access control list to limit downstream access to the IX20 device'sNTPservice.
n
The time zone setting, if the default setting of UTCis not appropriate.
To configure the IX20 device's NTPservice:
 Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.