System administration Configuresystem information
IX20 User Guide
1003
Contact :
>
n
Show more detailed system information:
1. Select the device in Remote Manager and click Actions> Open Console, or log into the
IX20 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. Enter show system verbose at the prompt:
> show system verbose
Model : Digi IX20
Serial Number : IX20xxxxxxxxyyyyxx
SKU : IX20
Hostname : IX20
MAC Address : DF:DD:E2:AE:21:18
Hardware Version : 50001947-01 1P
Firmware Version : 23.9.74.0
Alt. Firmware Version : 23.9.74.0
Alt. Firmware Build Date : Fri, Sept 29, 2023 12:10:00
Bootloader Version : 19.7.23.0-15f936e0ed
Schema Version : 715
Timezone : UTC
Current Time : Fri, Sept 29, 2023 12:10:00 +0000
CPU : 1.4%
Uptime : 6 days, 6 hours, 21 minutes, 57 seconds
(541317s)
Load Average : 0.01, 0.03, 0.02
RAM Usage : 119.554MB/1878.984MB(6%)
Temperature : 40C
Location :
Contact :
Disk
----
Disk /etc/config Usage : 18.421MB/4546.371MB(0%)
Disk /var/log_mnt Usage : 0.104MB/14.868MB(1%)
Disk /opt Usage : 215.739MB/458.328MB(50%)
Disk /tmp Usage : 0.003MB/120.0MB(0%)
Disk /var Usage : 0.816MB/32.0MB(3%)
>
Configure system information
You can configure information related to your IX20 device, such as providing a name and location for
the device.
To Next Page
Loading...
Need help?
General