Diagnostics Analyze network traffic
IX20 User Guide
1096
Analyze network traffic
The IX20 device includes a network analyzer tool that capturesdata traffic on any interface and
decodes the captured data traffic for diagnostics. You can capture data traffic on multiple interfaces
at the same time and define capture filters to reduce the captured data. You can capture up to 10 MB
of data traffic in two 5 MBfiles per interface.
To perform a more detailed analysis, you can download the captured data traffic from the device and
view it using a third-party application.
Note Data traffic is captured to RAMand the captured data islost when the device rebootsunlessyou
save the data to a file. See Save captured data traffic to a file.
This section contains the following topics:
Configure packet capture for the network analyzer 1097
Example filters for capturing data traffic 1106
Capture packets from the command line 1107
Stop capturing packets 1108
Show captured traffic data 1109
Save captured data traffic to a file 1111
Download captured data to your PC 1111
Clear captured data 1113
To Next Page
Loading...
Need help?
General