Digi IX20Quick Start Step 6: Configure cellular APN
IX20 User Guide
27
Step 6: Configure cellular APN
If you installed a SIMin step 1, the devicewill attempt to setup the APN automatically. However, if
your SIMwas set up with a custom APN, you will need to configure it manually:
1. Navigate to the Settingstab in the Remote Manager Device Detailsview.
2. Expand the Configmenu item and click on the Network settings menu.
3. Expand Interfaces> Modem >modem >APN list > APN list 1.
4. For APN, enter the custom APNprovided by your cellular provider.
5. Click Apply.
6. Navigate back to the Detailstab and watch for confirmation of cellular connectivity.
To Next Page
Loading...