Digi IX20 User Manual

Containers UseDigi Remote Manager to deploy and run containers
IX20 User Guide
986
vi. Click the Stream ID to view container status.
n
To verify by using the show containerscommand on the local device:
a. From the Remote Manager main menu, click  Management > Devices.
b. Select the device.
c. From the Actionsmenu, select  Open Console.
d. At the prompt, type show containers.
Use an automation to start the container
You can also use an automation to start a container:
1. Follow the steps in the previousprocedure, except:
n
For Run mode, select Manual.
n
Do not set Interval or Run single.
2. Create an automation that usesa Command Line Interface step.
For the Command Line Message, use the system script start command, using the label
provided for the script in the previousprocedure:
system script start StartContainerScript
Once the automation hasbeen created, you can:

Digi IX20 Specifications

General

Category	Wireless Router
Cellular Connectivity	4G LTE
Ethernet Ports	4
Wi-Fi	802.11ac
SIM Slots	2
WAN Ports	1
LAN Ports	3
Weight	0.5 kg
Operating Temperature	-40°C to +70°C (-40°F to +158°F)