Serial port ConfigureRealPort modeusing the Digi Navigator
IX20 User Guide
295
Install the Digi Navigator
This section explains how to download and install the Digi Navigator application.
Note Microsoft Visual C++ is required for RealPort and is installed by default during the Digi Navigator
install process.
1. Navigate to the Digi Navigator support page.
Note The Digi Navigator application can also bedownloaded from your device'sproduct
support page.
2. Scroll down to the Product Resourcestab, and in the Drivers & Patchessection, click Digi
Navigator.
3. From the list box, select the appropriate Microsoft Windowsoption from the list of driver
options.
4. Click the download link to download the Digi Navigator application.
5. When the download is complete, click on the downloaded .exe file. The Digi Navigator Setup
wizard displays.
6. Select which user(s) should beable to launch the Digi Navigator from this computer after it
has been installed:
n
Anyone who uses this computer (all users): Any user who logs into this computer can
launch the Digi Navigator.
n
Only for me. Only the user who was logged in to this computer when the Digi
Navigator was installed can launch the Digi Navigator. This is the default.
7. Click Install. TheCompleting Digi Navigator Setup screen displays.
8. Choose the Run Digi Navigator option if you want to launch the Navigator when the
installation iscomplete.
To Next Page
Loading...
Need help?
General