Hotspot
IX20 User Guide
410
0/0 0/0
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Customize the hotspot login page
The IX20 device provides three sample HTML webpagesfor use with the hotspot feature. When
hotspot is enabled for the first time, the sample webpages are installed to the /etc/config/hotspot
folder on the device's filesystem. By default, the hotspot redirects usersto one of the sample
webpages based on the authentication mode being used. See Hotspot authentication modesfor
information about which HTML file isused for each authentication mode. The sample HTML webpages
use ChilliLibrary.jsto perform authentication. Do not modify ChilliLibrary.js.
You can customize the sample HTML pages, or replace them with your own page, so that hotspot
users will be redirected to your custom HTML page when they log into the hotspot. You can also host
the HTML pages on an external web server, rather than on the IX20 device. See Create a new hotspot
for information about configuring the HTML page that the hotspot will use.
This section contains the following topics:
To Next Page
Loading...