To Next Page

To Previous Page

System administration Erase device configuration and reset to factory defaults

IX20 User Guide

1022

3. In the Configuration backup section, click SAVE.

Do not set a Passphrase for the configuration backup. The file will be downloaded using your

browser'sstandard download process.

4. After the configuration backup file hasbeen downloaded, rename the file to:

custom-default-config.bin

5. Upload the file to the device:

a. From the main menu, select System >Filesystem.

b. Under Default device configuration, click .

c. Select the file from your local file system.

6. Reboot the device.

Note After configuring a device to use custom factory default settings, wait five minutesafter

restoring to defaults before:

Powering off the device.

Performing any additional configuration restoration activities.

If you do not wait five minutesafter restoring to custom factory defaults before performing these

activities, the device will clear the custom factory defaults and reboot to standard factory defaults.

 Command line

Digi IX20 User Manual

Questions and Answers: