Interfaces WideArea Networks(WANs)
IX20 User Guide
106
Additional configuration items
n
See Configure SureLink activerecovery to detect WAN/WWANfailures for optional SureLink
configuration parameters.
To configure the IX20 device to reboot when an interface has failed:
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network >Interfaces.
4. Create a new interface or select an existing one:
n
To create a new interface, see Configure a Local Area Network (LAN), Configure a Wide
Area Network (WAN), or Configure a Wireless Wide Area Network (WWAN).
n
To edit an existing interface, click to expand the appropriate interface.
To Next Page
Loading...
Need help?
General