Interfaces WideArea Networks(WANs)
IX20 User Guide
148
Configure manual carrier selection
By default, your IX20 automatically selects the most appropriate cellular carrier based on the SIM that
isin use and the status of available carriers in your area.
Alternatively, you can configure the devicesto manually select the carrier, based on the Network
PLMNID. You can also configure the device to use manual carrier selection and fall back to automatic
carrier selection if connecting to the manually-configured carrier fails.
You can use also use the modem scan command at the command line to scan for available carriers
and determine their PLMN ID.
Required configuration items
n
Select Manual or Manual/Automatic carrier selection mode.
n
The Network PLMN ID.
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network >Interfaces> Modem.
To Next Page
Loading...
Need help?
General