Digi IX20 - Page 191

Interfaces Local Area Networks(LANs)
IX20 User Guide
191
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network >Interfaces> ETH1.
4. For Zone, select Internal.
5. Configure IPv4 settings:
a. Click to expand IPv4.
b. For Type, select Static IP address.
c. For Address, typethe IPv4 address and netmask, using the format IPv4_address/netmask,
for example, 192.168.3.1/24.
d. Enable the DHCPserver:
i. Click to expand DHCP server.
ii. Click to toggle on Enable.
e. Disable SureLink:
i. Click to expand SureLink.
ii. Click to toggle off Enable.