Digi IX20 User Manual

Wi-Fi Show Wi-Fi client statusand statistics
IX20 User Guide
362
To show a detailed statusand statistics of a Wi-Fi client, use the show wifi client name name
command.
1. Select the device in Remote Manager and click Actions> Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to accessthe Admin CLI.
2. At the Admin CLI prompt, type show wifi cleint name name:
> show wifi client name my_client
Client : my_client
Enabled : true
SSID : my_SSID
Status : up
Signal : -43
MAC Address : 91:fe:86:d1:0e:81
Channel : 48
Radio : wifi1
TX Power : 23
Link Quality : 67/70
BSSID : 6D:B9:DD:BD:EE:C4
>

Digi IX20 Specifications

General

Category	Wireless Router
Cellular Connectivity	4G LTE
Ethernet Ports	4
Wi-Fi	802.11ac
SIM Slots	2
WAN Ports	1
LAN Ports	3
Weight	0.5 kg
Operating Temperature	-40°C to +70°C (-40°F to +158°F)