To Next Page

To Previous Page

Routing IProuting

IX20 User Guide

443

d. Configure the source as the MACaddressof the VoIPphone:

i. Set the source type to mac:

(config network route policy 0)> src type mac

(config network route policy 0)>

ii. Set the MAC addressto the MACaddressof the VoIPphone:

(config network route policy 0)> src mac 26:88:0E:23:50:C2

(config network route policy 0)>

e. Configure the destination zone:

i. Set the source destination to zone:

(config network route policy 0)> dst type zone

(config network route policy 0)>

ii. Set the zone to CellularWAN:

(config network route policy 0)> dst zone CellularWAN

(config network route policy 0)>

6. Create a packet filtering rule that rejects all other LANpackets on the cellular WAN interface:

a. Create a new packet filtering rule:

i. Type... to moveto the root of the configuration:

(config network route policy 0)> ...

(config)>

ii. Create the packet filtering rule:

(config)> add firewall filter end

(config firewall filter 2)>

b. Set the lable to Reject LAN traffic to cellular WAN:

(config firewall filter 2)> label "Reject LAN traffic to cellular WAN"

(config firewall filter 2)>

c. Set the action to drop:

(config firewall filter 2)> action drop

(config firewall filter 2)>

d. Set the source zone to internal:

(config firewall filter 2)> src_zone internal

(config firewall filter 2)>

Digi IX20 User Manual

Questions and Answers: