EasyManua.ls Logo

Digi IX20 - Page 453

Digi IX20
1188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Routing Dynamic DNS
IX20 User Guide
453
dnsdynamic.org
...
Default value: custom
Current value: custom
(config network ddns new_ddns_instance)> service
b. Set the service:
(config network ddns new_ddns_instance)> service service_name
(config network ddns new_ddns_instance)>
6. If custom is configured for service, set the custom URL that should beused to update the IP
addresswith the Dynamic DNSprovider:
(config network ddns new_ddns_instance)> custom url
(config network ddns new_ddns_instance)>
7. Set the domain name that islinked to the interface'sIPaddress:
(config network ddns new_ddns_instance)> domain domain_name
(config network ddns new_ddns_instance)>
8. Set the username to authenticate with the Dynamic DNS provider:
(config network ddns new_ddns_instance)> username name
(config network ddns new_ddns_instance)>
9. Set the password to authenticate with the Dynamic DNS provider:
(config network ddns new_ddns_instance)> password pwd
(config network ddns new_ddns_instance)>
10. (Optional) Set the amount of time to wait to check if the interface'sIPaddressneeds to be
updated:
(config network ddns new_ddns_instance)> check_interval value
(config network ddns new_ddns_instance)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number{w|d|h|m|s}.
For example, to set check_interval to ten minutes, enter either 10m or 600s:
(config network ddns new_ddns_instance)> check_interval 600s
(config network ddns new_ddns_instance)>
The default is 10m.
11. (Optional) Set the amount of time to wait to force an update of the interface's IPaddress:
(config network ddns new_ddns_instance)> force_interval value
(config network ddns new_ddns_instance)>

Table of Contents