Routing Virtual Router Redundancy Protocol (VRRP)
IX20 User Guide
460
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network >VRRP.
4. Create a new VRRPinstance, or click to expand an existing VRRPinstance.
See Configure VRRPfor information about creating a new VRRPinstance.
5. Click to expand VRRP+.
6. Click Enable.
7. Add interfaces to monitor:
a. Click to expand Monitor interfaces.
b. Click to add an interface for monitoring.
c. For Interface, select the local interface to monitor. Generally, thiswill be a cellular or WAN
interface.
d. (Optional) Click again to add additional interfaces.
8. (Optional) For backup devices, click to enable Monitor VRRP+ master.
This parameter allowsa backup VRRPdevice to monitor the master device, and increase its
priority when the master device is failing SureLink tests. This can allow a device functioning as
a backup device to promote itself to master.
To Next Page
Loading...
Need help?
General