Virtual PrivateNetworks(VPN) IPsec
IX20 User Guide
514
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN >IPsec.
4. Create a new IPsec tunnel or select an existing one:
n
To create a new IPsec tunnel, see Configure an IPsec tunnel.
n
To edit an existing IPsec tunnel, click to expand the appropriate tunnel.
5. After creating or selecting the IPsec tunnel, click SureLink.
6. Enable SureLink.
To Next Page
Loading...