Virtual PrivateNetworks(VPN) IPsec
IX20 User Guide
516
o
The Interface address.
o
The Interface DNSserver.
l
Ping payload size: Thenumber of bytesto send as part of the ping payload.
n
DNS test: Performsa DNSquery to the named DNSserver.
If DNS test isselected, complete the following:
l
DNS server: The IPaddressof the DNSserver.
n
HTTP test: UsesHTTP(s) GETrequests to determine connectivity to the configured
web server.
If HTTP test is selected, complete the following:
l
Web server: The URL of the web server.
n
Test DNS servers configured for thisinterface: Tests communication with DNS
servers that are either provided by DHCP, or statically configured for this interface.
n
Test the interface status: Tests the current statusof the interface. Thetest fails if
the interface is down. Failing this test infers that all other tests fail.
If Test the interface statusis selected, complete the following:
l
Down time: The amount of time that the interfaceis down before the test can
be considered to have failed.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and
take the format number{w|d|h|m|s}.
For example, to set Down time to ten minutes, enter 10m or 600s.
l
Initial connection time: Theamount of time to wait for the interface to
connect for the first time before the test is considered to have failed.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and
take the format number{w|d|h|m|s}.
For example, to set Initial connection time to ten minutes, enter 10m or 600s.
n
Custom test: Teststhe interface with custom commands.
If Custom test is selected, complete the following:
l
The Commands to run to test.
n
TCP connection test: Tests that the interface can reach a destination port on the
configured host.
If TCP connection test is selected, complete the following:
l
TCP connect host: The hostname or IPaddress of the host to create a
TCP connection to.
l
TCP connect port: The TCPport to create a TCP connection to.
n
Test another interface's status: Tests the statusof another interface.
If Test another interface's statusis selected, complete the following:
To Next Page
Loading...
Need help?
General