Virtual PrivateNetworks(VPN) IPsec
IX20 User Guide
531
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN >IPsec.
4. Click to expand Advanced.
5. For Debug level, select one of the following:
n
Disable debug messages.
n
Basic auditing debug: Logsbasic auditing information, (for example, SAup/SAdown).
n
Generic control flow : Select this for basic debugging information.
n
Detailed control flow : More detailed debugging control flow.
n
Raw data: Includesraw data dumpsin hexadecimal format.
n
Sensitive material: Also includes sensitive material in dumps(for example, encryption
keys).
6. Click Apply to savethe configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions> Open Console, or log into the IX20
local command line as a user with full Admin access rights.
To Next Page
Loading...
Need help?
General