Virtual PrivateNetworks(VPN) OpenVPN
IX20 User Guide
548
l
The Private key (for example, server.key).
l
The Diffie Hellman key (usually in dh2048.pem).
n
Activerecovery configuration. See Configure SureLink activerecovery for OpenVPNfor
information about OpenVPNactiverecovery.
Additional configuration items
n
The route metric for the OpenVPNserver.
n
The range of IPaddresses that the OpenVPNserver will provide to clients.
n
The TCP/UDPport to use. By default, the IX20 device uses port 1194.
n
Access control list configuration to restrict accessto the OpenVPNserver through the firewall.
n
Additional OpenVPN parameters.
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN >OpenVPN >Servers.
To Next Page
Loading...
Need help?
General