Digi IX20 - Page 555

Virtual PrivateNetworks(VPN) OpenVPN
IX20 User Guide
555
Use ... network interface ?to display interface information:
(config vpn openvpn server name)> ... network interface ?
Interfaces
Additional Configuration
-------------------------------------------
defaultip Default IP
defaultlinklocal Default Link-local IP
eth1 ETH1
eth2 ETH2
loopback Loopback
modem Modem
(config vpn openvpn server name)>
Repeat thisstep to list additional interfaces.
n
To limit access based on firewall zones:
(config vpn openvpn server name)> add acl zone end value
(config vpn openvpn server name)>
Where value is a firewall zone defined on your device, or the any keyword.
Display a list of available firewall zones:
Type ... firewall zone ?at the config prompt:
(config vpn openvpn server name)> ... firewall zone ?
Zones: A list of groups of network interfaces that can be
referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------------
-----------------------
any
dynamic_routes
edge
external
hotspot
internal
ipsec
loopback
setup
(config vpn openvpn server name)>
Repeat thisstep to include additional firewall zones.
9. (Optional) Set additional OpenVPN parameters.