Digi IX20 User Manual

Services Configurethe web administration service
IX20 User Guide
658
The default is TLS-1_2.
8. (Optional) Disable legacy port redirection.
Legacy port redirection is used to redirect client HTTPrequests to the HTTPSservice. Legacy
port redirection is enabled by default, and normally these settings should not be changed.
To disable legacy port redirection:
(config)> service web_admin legacy enable false
(config)>
9. Save the configuration and apply the change
(config)> save
Configuration saved.
>
10. Typeexit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Digi IX20 Specifications

General

Category	Wireless Router
Cellular Connectivity	4G LTE
Ethernet Ports	4
Wi-Fi	802.11ac
SIM Slots	2
WAN Ports	1
LAN Ports	3
Weight	0.5 kg
Operating Temperature	-40°C to +70°C (-40°F to +158°F)