Digi IX20 User Manual

Services Configure SSH access
IX20 User Guide
665
n
To enable the mDNSprotocol:
(config)> service ssh mdns enable true
(config>
n
To disable the mDNSprotocl:
(config)> service ssh mdns enable false
(config)>
6. (Optional) Set the port number for this service.
The default setting of 22 normally should not be changed.
(config)> service ssh port 24
(config)>
7. To create custom SSH configuration settings:
a. Enable custom configurations:
(config)> service ssh custom enable true
(config)>
b. To override the standard SSH configuration and only use the config_file parameter:
(config)> service ssh custom override true
(config)>
n
If override is set to true, entries in Configuration file will be used in place of the
standard SSH configuration.
n
If override is set to false, entries in Configuration file will be added to the
standard SSH configuration.
The default is false.
c. Set the configuration settings:
(config)> service ssh custom config_file value
(config)>
where value is one or more entires in the form of an OpenSSH sshd_config file. For
example, to enable the diffie-helman-group-sha-14 key exchange algorithm:
(config)> service ssh custom config_file "KexAlgorithms +diffie-
hellman-group14-sha1"
(config)>
8. Save the configuration and apply the change
(config)> save
Configuration saved.
>

Digi IX20 Specifications

General

Category	Wireless Router
Cellular Connectivity	4G LTE
Ethernet Ports	4
Wi-Fi	802.11ac
SIM Slots	2
WAN Ports	1
LAN Ports	3
Weight	0.5 kg
Operating Temperature	-40°C to +70°C (-40°F to +158°F)