Services ConfigureDNS
IX20 User Guide
676
n
Specific host names and their IPaddresses.
The device is configured by default with the hostname digi.device, which corresponds to the
192.168.210.1 IPaddress.
To configure the DNSserver:
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services> DNS.
4. Click Access control list to configure accesscontrol:
n
To limit access to specified IPv4 addresses and networks:
a. Click IPv4 Addresses.
b. For Add Address, click .
c. For Address, enter the IPv4 addressor network that can accessthe device's DNS
service. Allowed values are:
To Next Page
Loading...