EasyManuals Logo

Digi IX20 User Manual

Digi IX20
1188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
Central management Configureyour device for Digi Remote Manager support
IX20 User Guide
68
where value is any number of hours, minutes, or seconds, and takes the format number
{h|m|s}.
For example, to set the keep-alive interval to ten minutes, enter either 10m or 600s:
(config)> cloud drm keep_alive 600s
(config)>
7. (Optional) Set the amount of time that the IX20 device should wait between sending keep-alive
messagesto the Digi Remote Manager when using a cellular interface. Allowed values are from
30 secondsto two hours. The default is 290 seconds.
(config)> cloud drm cellular_keep_alive value
(config)>
where value is any number of hours, minutes, or seconds, and takes the format number
{h|m|s}.
For example, to set the cellular keep-alive interval to ten minutes, enter either 10m or 600s:
(config)> cloud drm cellular_keep_alive 600s
(config)>
8. Set the number of allowed keep-alive misses. Allowed values are any integer between 2 and
64. The default is 3.
(config)> cloud drm keep_alive_misses integer
(config)>
9. The watchdogis used to monitor the connection to remote cloud services. If the connection is
down, you can configure the device to restart the connection, or to reboot. The watchdog is
enabled by default. To disable:
(config)> cloud drm watchdog false
(config)>
10. If watchdog is enabled:
a. (Optional) Set the amount of time to wait before restarting the connection to the remote
cloud services, once the connection is down.
where value is any number of hours, minutes, or seconds, and takes the format number
{h|m|s}.
For example, to set restart_timeout to ten minutes, enter either 10m or 600s:
(config)> cloud drm restart_timeout 600s
(config)>
The minimum value is 30 minutes and the maximum is 48 hours. If not set, this option is
disabled. The default is 30 minutes.
b. (Optional) Set the amount of time to wait before rebooting the device, once the
connection to the remote cloud servicesis down. By default, this option is not set, which
meansthat the option is disabled.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digi IX20 and is the answer not in the manual?

Digi IX20 Specifications

General IconGeneral
CategoryWireless Router
Cellular Connectivity4G LTE
Ethernet Ports4
Wi-Fi802.11ac
SIM Slots2
WAN Ports1
LAN Ports3
Weight0.5 kg
Operating Temperature-40°C to +70°C (-40°F to +158°F)