Services Modbusgateway
IX20 User Guide
748
Log into the IX20 WebUI asa user with full Admin accessrights.
1. On the menu, select Status> ModbusGateway.
The ModbusGateway page appears.
Statisticsrelated to the Modbusgateway server are displayed. If the message Server
connections not available is displayed, this indicatesthat there are no connected clients.
n
To view information about Modbusgateway clients, click Clients.
n
To view statistics that are common to both the clients and server, click Common
Statistics.
n
To view configuration details about the gateway, click the (configuration) icon in the
upper right of the gateway's statuspane.
Command line
1. Select the device in Remote Manager and click Actions> Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to accessthe Admin CLI.
2. Use the show modbus-gateway command at the system prompt:
> show modbus-gateway
Server Connection IP Address Port Uptime
----------------- ----------- ----- ------
modbus_socket 10.45.1.139 49570 6
modbus_socket 10.45.1.139 49568 13
Client Uptime
-------------------- ------
modbus_socket_41 0
modbus_socket_21 0
modbus_serial_client 428
>
If the message Server connections not available isdisplayed, this indicatesthat there are no
connected clients.
3. Use the show modbus-gateway verbose command at the system prompt to display more
information:
> show modbus-gateway verbose
Client Uptime
-------------------- ------
modbus_socket_41 0
modbus_socket_21 0
modbus_serial_client 506
Common Statistics
-----------------
To Next Page
Loading...
Need help?
General