Services System time
IX20 User Guide
752
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System >Time
4. (Optional) For Timezone, select either UTCor select the location nearest to your current
location to set the timezone for your IX20 device. The default is UTC.
5. (Optional) Add upstream NTPservers that the device will use to synchronize its time. The
default setting is time.devicecloud.com.
n
To change the default value of the NTPserver:
a. Click NTP servers.
b. For Server, type a new server name.
n
To add an NTP server:
a. Click NTP servers.
b. For Add Server, click .
c. For Server, enter the hostname of the upstream NTP server that the device will use
to synchronize its time.
d. Click to add additional NTPservers. If multiple servers are included, servers are
tried in the order listed until onesucceeds.
Note This list is synchronized with the list of servers included with NTPserver configuration,
and changes made to one will be reflected in the other. See Configure the device as an NTP
server for more information about NTPserver configuration.
6. Click Apply to savethe configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions> Open Console, or log into the IX20
local command line as a user with full Admin access rights.
To Next Page
Loading...
Need help?
General