Services Usethe iPerf service
IX20 User Guide
786
Note Using iPerf clients that are at a version earlier than iPerf3 to connect to the IX20 device'siPerf3
server may result in unpredictable results. Asa result, Digi recommendsusing an iPerf client at
version 3or newer to connect to the IX20 device's iPerf3 server.
Required configuration items
n
Enable the iPerf server on the IX20 device.
n
An iPerf3 client installed on aremote host. iPerf3 software can bedownloaded at
https://iperf.fr/iperf-download.php.
Additional configuration Items
n
The port that the IX20 device'siPerf server will use to listen for incoming connections.
n
The accesscontrol list for the iPerf server.
When the iPerf server is enabled, the IX20 device will automatically configure its firewall rules
to allow incoming connectionson the configured listening port. You can restrict access by
configuring the access control list for the iPerf server.
To enable the iPerf3 server:
Web
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
To Next Page
Loading...
Need help?
General