Applications Develop Python applications
IX20 User Guide
814
The Configuration window is displayed.
iii. Click System >Scheduled tasks> Custom scripts.
iv. Click to add a custom script.
v. For Label, type Show system application.
vi. For Run mode, select On boot.
vii. For Exit action, select Restart script.
viii. For Commands, type python /etc/config/scripts/showsystem.py.
ix. Click Apply to savethe configuration and apply the change.
Command line
i. Select the device in Remote Manager and click Actions> Open Console, or log into
the IX20 local command line as a user with full Admin accessrights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
ii. At the command line, type configto enter configuration mode:
> config
(config)>
To Next Page
Loading...