EasyManuals Logo

Digi IX20 User Manual

Digi IX20
1188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #847 background imageLoading...
Page #847 background image
Applications Set up the IX20 to automatically run your applications
IX20 User Guide
847
n
boot: The script will run once each time the device boots.
l
If boot is selected, set the action that will be taken when the script completes:
(config system schedule script 0)> exit_action action
(config system schedule script 0)>
where action is one of the following:
o
none: Action taken when the script exits.
o
restart: Runsthe script repeatedly.
o
reboot: The device will reboot when the script completes.
n
interval: The script will start running at the specified interval, within 30 secondsafter
the configuration change is saved. If interval isselected:
l
Set the interval:
(config system schedule script 0)> on_interval value
(config system schedule script 0)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes
the format number{w|d|h|m|s}.
For example, to set on_interval to ten minutes, enter either 10m or 600s:
(config system schedule script 0)> on_interval 600s
(config system schedule script 0)>
l
(Optional) Configure the script to run only a single instance at a time:
(config system schedule script 0)> once true
(config system schedule script 0)>
If once is set to false, a new instance of the script will be started at every interval,
regardlessof whether the script is still running from a previousinterval.
n
set_time: Runsthe script at a specified time of the day.
l
If set_time is set, set the time that the script should run, using the format HH:MM:
(config system schedule script 0)> run_time HH:MM
(config system schedule script 0)>
n
maintenance_time: The script will run during the system maintenance time window.
6. Set the commandsthat will execute the script:
(config system schedule script 0)> commands filename
(config system schedule script 0)>
where filenameis the path and filename of the script, and any related command line
information.
n
If a Python script is being used, include the full path to the Python script and enclose in
quotation marks. For example:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digi IX20 and is the answer not in the manual?

Digi IX20 Specifications

General IconGeneral
CategoryWireless Router
Cellular Connectivity4G LTE
Ethernet Ports4
Wi-Fi802.11ac
SIM Slots2
WAN Ports1
LAN Ports3
Weight0.5 kg
Operating Temperature-40°C to +70°C (-40°F to +158°F)