Digi IX20 - Page 878

User authentication Authentication groups
IX20 User Guide
878
n
Serial access:
(config auth group test)> acl serial enable true
(config)>
5. (Optional) Configure captiveportal access:
a. Return to the config prompt by typing three periods(...):
(config auth group test)> ...
(config)>
b. Enable captive portal access rights for users of this group:
(config)> auth group test acl portal enable true
(config)>
c. Add a captive portal to which users of this group will haveaccess:
i. Determine available portals:
(config)> show firewall portal
portal1
auth none
enable true
http redirect
no interface
no message
no redirect_url
no terms
timeout 24h
no title
(config)>
ii. Add a captive portal:
(config)> add auth group test acl portal portals end portal1
(config)>
6. (Optional) Configure Nagiosmonitoring:
(config)> auth group test acl nagios enable true
(config)>
7. (Optional) Enable users that belong to this group to accessthe Wi-Fi scanning service:
(config)> auth group group test acl wifi_scanner enable true
(config)>
8. Save the configuration and apply the change
(config)> save
Configuration saved.
>