User authentication Disable shell access
IX20 User Guide
917
1. Log into Digi Remote Manager, or log into the local Web UI asa user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication.
4. Click to disable Allow shell.
Note If shell accessisdisabled, re-enabling it will erase the device's configuration and perform
a factory reset.
5. Click Apply to savethe configuration and apply the change.
Command line
To Next Page
Loading...
Need help?
General