set lacp
4-38 Port Configuration
set lacp
UsethiscommandtodisableorenabletheLinkAggregationControlProtocol(LACP)onthe
device.
Syntax
set lacp {disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodisableLACP:
D2(su)->set lacp disable
set lacp asyspri
UsethiscommandtosettheLACPsystempriority.
Syntax
set lacp asyspri value
Parameters
Defaults
None.
Admin Key Port’s assigned key. D-Series devices provide a default admin key value of 32768 for
all LAG ports (lag.0.1 though lag.0.6).
Oper Key Port’s operational key, derived from the admin key. Only underlying physical ports
with oper keys matching the aggregator’s will be allowed to aggregate.
Attached Ports Underlying physical ports associated with this aggregator.
Table 4-16 show lacp Output Details (Continued)
Output Field What It Displays...
disable|enable DisablesorenablesLACP.
asyspri SetsthesystemprioritytobeusedincreatingaLAG(LinkAggregation
Group)ID.Validvaluesare0to65535.
value Specifiesasystempriorityvalue.Validvaluesare0to65535,with
precedencegiventolowervalues.
To Next Page
Loading...
Need help?
General
