Enterasys D2 D2G124-12P

set multiauth precedence
D-Series CLI Reference 15-33
set multiauth precedence
Usethiscommandtosetthesystem’smultipleau thenticationadministrativeprecedence.
Syntax
set multiauth precedence {[dot1x] [mac] }
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Whenauserissuccessfullyauthenticatedbymorethanonemethodatthesametime,the
precedenceoftheauthenticationmethodswilldeterminewhichRADI US‐returnedfilterIDwillbe
processedandresultinanappliedtrafficpolicyprofile.
Example
ThisexampleshowshowtosetprecedenceforMACauthentication:
D2(rw)->set multiauth precedence mac dot1x
clear multiauth precedence
Usethiscommandtoclearthesystem’smultipleauthenticationadministrativeprecedence.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearthemultipleauthenticationprecedence:
D2(rw)->clear multiauth precedence
dot1x Setsprecedencefor802.1Xauthentication.
mac SetsprecedenceforMACauthentication.
pwa Setsprecedenceforportwebauthentication