Enterasys D2 D2G124-12P

clear spantree lpcapablepartner
6-44 Spanning Tree Configuration
clear spantree lpcapablepartner
UsethiscommandtoresettheLoopProtectcapabilityofportlinkpartnerstothedefaultstateof
false.
Syntax
clear spantree lpcapablepartner port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresettheLoopProtectpartnercapabilityforge.1.1:
D2(rw)->clear spantree lpcapablepartner ge.1.1
set spantree lpthreshold
UsethiscommandtosettheLoopProtecteventthreshold.
Syntax
set spantree lpthreshold value
Parameters
Defaults
None.Thedefaulteventthresholdis3.
Mode
Switchcommand,read‐write.
Usage
TheLoopProtecteventthresholdisaglobalintegervariablethatprovidesprotectioninthecaseof
intermittentfailures.Thedefaultvalueis3.Iftheeventcounterreachesthethresholdwithina
givenperiod(theeventwindow),thentheport,forthegivenSID,becomeslocked(thatis,held
indefinitelyin
theblockingstate). Ifthethresholdis0,theportsareneverlocked.
port‐string Specif iesport(s)forwhichtocleartheirlinkpartners’LoopProtect
capability(resettofalse).
value Specifiesthenumberofeventsthatmustoccurduringtheevent
windowinordertolockaport/SID.Thedefaultvalueis3events.A
thresholdof0specifiesthatportswillneverbelocked.