Enterasys D2 D2G124-12P

show cos state
D-Series CLI Reference 9-19
Example
ThisexampleshowshowtoenableClassofService:
D2(rw)->set cos state enable
show cos state
UsethiscommandtodisplaytheClassofServiceenablestate.
Syntax
show cos state
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtoshowtheClassofServiceenablestate:
D2(rw)->show cos state
Class-of-Service application is enabled
clear cos state
UsethiscommandtosetCoSstatebacktoitsdefaultsettingofdisabled.
Syntax
clear cos state
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheCoSstatebacktoitsdefaultsettingofdisabled:
D2(su)->clear cos state