Enterasys D2 D2G124-12P User Manual

Configuring Diffserv Policies and Assigning Classes
D-Series CLI Reference 8-9
Configuring Diffserv Policies and Assigning Classes
Purpose
Toreview,create,andconfigureDiffservpoliciesandassignclasses.
Commands
Thecommandsusedtoreview,create,andconfigureDiffservpoliciesandassignclassesarelisted
belowanddescribedintheassociatedsectionasshown.
show diffserv policy
UsethiscommandtodisplayinformationaboutDiffservpolicies.
Syntax
show diffserv policy {summary | detailed policyname}
Parameters
Defaults
None.
Mode
Switchcommand.Read‐Only.
For information about... Refer to page...
show diffserv policy 8-9
set diffserv policy create 8-10
set diffserv policy delete 8-10
set diffserv policy class 8-11
set diffserv policy mark 8-11
set diffserv policy police style simple 8-12
set diffserv policy police action conform 8-13
set diffserv policy police action nonconform 8-13
set diffserv policy rename 8-14
summary DisplaysDiffservpolicysummaryinformation.
detailed
policyname
DisplaysdetailedDiffservinformationforaspecificpolicy.

Enterasys D2 D2G124-12P Specifications

General

Brand	Enterasys
Model	D2 D2G124-12P
Category	Network Router
Language	English