Enterasys D2 D2G124-12P

set policy profile
9-4 Policy Classification Configuration
set policy profile
Usethiscommandtocreateapolicyprofileentry.
Syntax
set policy profile profile-index [name name] [pvid-status {enable | disable}]
[pvid pvid] [cos-status { enable | disable}] [cos cos] [precedence precedence-list]
Parameters
Ifoptionalparametersarenotspecified,nonewillbeapplied.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtocreateapolicyprofile1named“netadmin”withPVIDoverride
enabledforPVID10,and Class‐of‐ServiceoverrideenabledforCoS5:
D2(su)->set policy profile 1 name netadmin pvid-status enable pvid 10 cos-status
enable cos 5
Oper Profile Usage Ports currently assigned to use this policy profile.
Dynamic Profile
Usage
Port dynamically assigned to use this policy profile.
Table 9-33 show policy profile Output Details (Continued)
Output Field What It Displays...
profile‐index Specifiesanindexnumberforthepolicyprofile.Validvaluesare1‐255.
namename (Optional)Specifiesanameforthepolicyprofile.Thisisastringfrom1to
64characters.
pvid‐status
enable|disable
(Optional)EnablesordisablesPVIDoverrideforthisprofile.Ifall
classificationrules
associatedwiththisprofilearemissed,thenthis
parameter,ifspecified,determinesdefaultbehavior.
pvidpvid (Optional)SpecifiesthePVIDtopackets,ifPVIDoverrideisenabledand
invokedasdefaultbehavior.
cos‐statusenable
|disable
(Optional)EnablesordisablesClassof Serviceoverrideforthisprofile.Ifall
classificationrulesassociated
withthisprofilearemissed,thenthis
parameter,ifspecified,determinesdefaultbehavior.
Note: A maximum of 99 rules can be supported per policy profile for policy
profiles that have cos-status enabled..
coscos (Optional)SpecifiesaCoSvaluetoassigntopackets,ifCoSoverrideis
enabledandinvokedasdefaultbehavior.Validvaluesare0to7.
precedence
precedence‐list
(Optional)Assignsaruleprecedencetothisprofile.Lowervalueswillbe
givenhigherprecedence.Foralistofvalues,referto
theshowpolicy
profilecommandoutput.