show spantree stats
D-Series CLI Reference 6-5
show spantree stats
UsethiscommandtodisplaySpanningTreeinformationforoneormoreports.
Syntax
show spantree stats [port port-string] [sid sid] [active]
Parameters
Defaults
Ifport‐stringisnotspecified,SpanningTreeinformationforallportswillbedisplayed.
Ifsidisnotspecified,informationforSpanningTree0willbedisplayed.
Ifactiveisnotspecifiedinformationforallportswillbedisplayedregardlessofwhetherornot
theyhavereceivedBPDUs.
Mode
Switchcommand,read‐only.
set spantree protomigration 6-24
show spantree spanguard 6-24
set spantree spanguard 6-25
clear spantree spanguard 6-26
show spantree spanguardtimeout 6-26
set spantree spanguardtimeout 6-26
clear spantree spanguardtimeout 6-27
show spantree spanguardlock 6-27
clear/set spantree spanguardlock 6-28
show spantree spanguardtrapenable 6-28
set spanstree spanguardtrapenable 6-29
clear spanstree spanguardtrapenable 6-29
show spantree legacypathcost 6-30
set spantree legacypathcost 6-30
clear spantree legacypathcost 6-31
For information about... Refer to page...
portport‐string (Optional)Displaysinformationforthespecifiedport(s).Foradetailed
descriptionofpossibleport‐‐stringvalues,referto“PortSt ringSyntaxUsed
intheCLI”onpage 4‐1.
sidsid (Optional)DisplaysinformationforaspecificSpanningTreeidentifier.If
notspecified,SID0isassumed.
active (Optional)Displaysinformation
forportsthathavereceivedSTPBPDUs
sinceboot.
To Next Page
Loading...
