Enterasys D2 D2G124-12P

clear rmon channel
D-Series CLI Reference 13-17
Defaults
Ifanactionisnotspecified,packetswillbeacceptedonfiltermatches.
Ifnotspecified,controlwillbesettooff.
Ifadescriptionisnotspecified,nonewillbeapplied.
Ifownerisnotspecified,itwillbesettomonitor.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocreateanRMONchannelentry:
D2(rw)->set rmon channel 54313 ge.2.12 accept failed control on description
"capture all"
clear rmon channel
UsethiscommandtoclearanRMONchannelentry.
Syntax
clear rmon channel index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearRMONchannelentry2:
D2(rw)->clear rmon channel 2
show rmon filter
UsethiscommandtodisplayoneormoreRMONfilterentries.
Syntax
show rmon filter [index index | channel channel]
description
description
(Optional)Specifiesadescriptionforthischannel.
ownerowner (Optional)Specifiesthenameoftheentitythatconfiguredthisentry.
index Specifiesthechannelentrytobecleared.