Enterasys D2 D2G124-12P

clear port protected name
4-50 Port Configuration
Example
Thisexampleshowshowtoshowthenameofprotectedportgroup1:
D2(ro)->show port protected name 1
Group ID Group Name
-----------------------------
1 group1
clear port protected name
Usethiscommandtoclearthenameofaprotectedgroup.
Syntax
clear port protected name group-id
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearthename ofprotectedportgroup1:
D2(rw)->clear port protected name 1
group‐id Specifiestheidofthegroupforwhichtoclearthename.Idcanrange
from0to2.