Enterasys D2 D2G124-12P

clear spantree lp
D-Series CLI Reference 6-41
clear spantree lp
UsethiscommandtoreturntheLoopProtectstatusperportandoptionally,perSID,toitsdefault
stateofdisabled.
Syntax
clear spantree lp port-string [sid sid]
Parameters
Defaults
IfnoSIDisspecified, SID0isassumed.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoreturntheLoopProtectstateonge.2.3todisabled:
D2(rw)->clear spantree lp port ge.2.3
show spantree lplock
UsethiscommandtodisplaytheLoopProtectlockstatusperportand/orperSID.Aportcan
becomelockedifaconfigurednumberofLoopProtectev entsoccurduringtheconfigured
windowoftime.Seethesetspantreelpthresholdandsetspantreelpwindowcommands.Oncea
portisforcedinto
blocking(locked),itremainslockeduntilmanuallyunlockedwiththeclear
spantreelplockcommand.
Syntax
show spantree lplock [port port-string] [sid sid]
Parameters
Defaults
Ifnoport‐stringisspecified,statusisdisplayedforallports.
IfnoSIDisspecified, SID0isassumed.
port‐string Specif iesport(s)forwhichtocleartheLoopProtectfeaturestatus.
sidsid (Optional)SpecifiesthespecificSpanningTree(s)forwhichtoclearthe
LoopProtectfeaturestatus.Valid
valuesare0‐4094.Ifnotspecified,
SID0isassumed.
port‐string (Optional)Specifiesport(s)forwhichtodisplaytheLoopProtectlock
status.
sidsid (Optional)SpecifiesthespecificSpanningTree(s)forwhichtodisplay
theLoopProtectlockstatus.Validvaluesare0‐4094.Ifnotspecified,
SID0isassumed.