Enterasys D2 D2G124-12P

clear sntp poll-retry
12-30 Logging and Network Management
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthenumberofSNTPpollretriesto5:
D2(su)->set sntp poll-retry 5
clear sntp poll-retry
UsethiscommandtoclearthenumberofpollretriestoaunicastSNTPserver.
Syntax
clear sntp poll-retry
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearthenumberofSNTPpollretries:
D2(su)->clear sntp poll-retry
set sntp poll-timeout
Usethiscommandtosetthepolltimeout(inseconds)foraresponsetoaunicastSNTPrequest.
Syntax
set sntp poll-timeout timeout
Parameters
Defaults
None.
retry Specifiesthenumberofretries.Validvaluesare0to10.
timeout Specifiesthepolltimeoutinseconds.Validvaluesare1to30.