Enterasys D2 D2G124-12P

set system password history
D-Series CLI Reference 2-7
set system password history
Usethiscommandtosetthe numberofpreviouslyuseduserloginpasswordsthatwillbechecked
forpasswordduplication.Thispreventsduplicatepasswordsfrombeingenteredintothesystem
withthesetpasswordcommand.
Syntax
set system password history size
Parameters
Defaults
None.
Mode
Switchcommand,superuser.
Example
Thisexampleshowshowtoconfigurethesys temtocheckthelast10passwordsforduplication
D2(su)->set system password history 10
show system lockout
Usethiscommandtodisplaysettingsforlockingoutusersafterfailedattemptstologintothe
system.
Syntax
show system lockout
Parameters
None.
Defaults
None.
Mode
Switchcommand,superuser.
Example
Thisexampleshowshowtodisplayuserlockoutsettings.Inthiscase,switchdefaultshavenot
beenchanged:
D2(su)->show system lockout
Lockout attempts: 3
Lockout time: 15 minutes.
Table 2‐5providesanexplanationofthecommandoutput..
size Specifiesthenumberofpasswordscheckedforduplication.Validvalues
are0to10.