set spantree lp
D-Series CLI Reference 6-39
Commands
set spantree lp
UsethiscommandtoenableordisabletheLoopProtectfeatureperportandoptionally,perSID.
TheLoopProtectfeatureisdisabledbydefault.See“LoopProtect”onpage 2.formore
information.
Syntax
set spantree lp port-string {enable | disable} [sid sid]
Parameters
For information about... Refer to page...
set spantree lp 6-39
show spantree lp 6-40
clear spantree lp 6-41
show spantree lplock 6-41
clear spantree lplock 6-42
set spantree lpcapablepartner 6-42
show spantree lpcapablepartner 6-43
clear spantree lpcapablepartner 6-44
set spantree lpthreshold 6-44
show spantree lpthreshold 6-45
clear spantree lpthreshold 6-45
set spantree lpwindow 6-46
show spantree lpwindow 6-46
clear spantree lpwindow 6-47
set spantree lptrapenable 6-47
show spantree lptrapenable 6-48
clear spantree lptrapenable 6-48
set spantree disputedbpduthreshold 6-48
show spantree disputedbpduthreshold 6-49
clear spantree disputedbpduthreshold 6-50
show spantree nonforwardingreason 6-50
port‐string Specif iesport(s)onwhichtoenableordisabletheLoopProtectfeature.
enable|disable Enablesordisablesthefeatureonthespecifiedport.
sidsid (Optional)EnablesordisablesthefeatureforspecificSpanningTree(s).
Validvaluesare0‐4094.Ifnotspecif ied,SID0isassumed.
To Next Page
Loading...
